View HIF3BA-14PA-254DS_9003837.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) b15 ribbon cable connector compliant with mil standard hif3b series features 1. product compliant with mil standard hif3b series has been developed as a product compliant with mil standard, and used for wide applications. 2. ul approval product hif3b series connectors are ul approved. 3. mechanism to prevent mis-insertion this connector is equipped with the mechanism to prevent mis- insertion as follows. 1 the system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (mil standard). 2 the system embeds and guides the polarizing key in the socket holes. 4. applicable cable awg#28 the applicable cable is ul2651 awg#28 flat cable (7 cores./ 0.127mm, jacket dia. 0.9 0.1mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-55 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds material part material finish remarks insulator pbt black ul94v-0 socket contact beryllium copper connection area gold plated pin header contact brass selective gold plated b16 hif3b series ribbon cable connector compliant with mil standard ordering information hif 3b - * d - 2.54 r qw r ety q series name : hif w series no. : 3b, 3ba, 3bb ( 50, 60, 64 contacts only ) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r contact alignment : d : double t contact pitch : 2.54mm y connection type r : id type socket hif 3b - * p a - 2.54 ds qw r et yu q series name : hif w series no. : 3b : (14 contacts not included) 3bc: (10 contacts only) 3ba, 3bb: (50, 60, 64 contacts only) 3bd: (10 contacts only) e number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r p : pin header t a : selective gold plated y contact pitch : 2.54mm u contact style ds : right angle type dsa : straight type pin header b17 hif3b series ribbon cable connector compliant with mil standard socket (with guide to prevent mis-insertion) unit:mm note1, note2: the number of polarizing keys and polarizing keyways changes according to products. refer to the list as shown be low. note3: the 50, 60 and 64 contact connector contain two types of polarizing guides. use the products, referring to notes 1 and 2 . note4: the 6 contact has no polarizing mark. the products marked with comply with mil standard. body protector clamp cl no. part number 610-0032-3 610-0021-7 610-0022-0 610-0023-2 610-0024-5 610-0025-8 610-0026-0 610-0027-3 610-0028-6 610-0029-9 610-0041-4 610-0030-8 610-0042-7 610-0031-0 610-0043-0 hif3ba- 6d-2.54r hif3ba-10d-2.54r hif3ba-14d-2.54r hif3ba-16d-2.54r hif3ba-20d-2.54r hif3ba-26d-2.54r hif3ba-30d-2.54r hif3ba-34d-2.54r hif3ba-40d-2.54r hif3ba-50d-2.54r hif3bb-50d-2.54r hif3ba-60d-2.54r hif3bb-60d-2.54r hif3ba-64d-2.54r hif3bb-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 68.07 80.77 80.77 85.85 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 62.23 74.93 74.93 80.01 80.01 d 7.72 12.8 17.88 20.42 25.5 33.12 38.2 43.28 50.9 63.6 63.6 76.3 76.3 81.38 81.38 polarizing guide (note 1) one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing keyway (note 2) rohs none one on left side one on right and left sides, resp. yes b18 hif3b series ribbon cable connector compliant with mil standard socket note1: the number of polarizing keys and polarizing keyways changes according to products. for details, refer to the list as sh own below. note2: the 6 contact has no polarizing mark. body protector clamp unit:mm the products marked with comply with mil standard. cl no. part number 610-0012-6 610-0001-0 610-0002-2 610-0003-5 610-0004-8 610-0005-0 610-0006-3 610-0007-6 610-0008-9 610-0009-1 610-0010-0 610-0011-3 hif3b- 6d-2.54r hif3b-10d-2.54r hif3b-14d-2.54r hif3b-16d-2.54r hif3b-20d-2.54r hif3b-26d-2.54r hif3b-30d-2.54r hif3b-34d-2.54r hif3b-40d-2.54r hif3b-50d-2.54r hif3b-60d-2.54r hif3b-64d-2.54r number of contacts 6 10 14 16 20 26 30 34 40 50 60 64 a 12.19 17.27 22.35 24.89 29.97 37.59 42.67 47.75 55.37 68.07 80.77 85.85 b 5.08 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 c 6.35 11.43 16.51 19.05 24.13 31.75 36.83 41.91 49.53 62.23 74.93 80.01 d 7.72 12.80 17.88 20.42 25.50 33.12 38.2 43.28 50.90 63.6 76.3 81.38 polarizing guide (note 1) rohs none one on left side one on right and left sides, resp. yes b19 hif3b series ribbon cable connector compliant with mil standard four wall angle through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, referring to (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0091-2(71) 610-0171-0(71) 610-0092-5(71) 610-0093-8(71) 610-0094-0(71) 610-0095-3(71) 610-0096-6(71) 610-0097-9(71) 610-0098-1(71) 610-0099-4(71) 610-0131-5(71) 610-0100-1(71) 610-0132-8(71) 610-0101-4(71) 610-0133-0(71) hif3ba-10pa-2.54ds(71) hif3bd-10pa-2.54ds(71) hif3ba-14pa-2.54ds(71) hif3ba-16pa-2.54ds(71) hif3ba-20pa-2.54ds(71) hif3ba-26pa-2.54ds(71) hif3ba-30pa-2.54ds(71) hif3ba-34pa-2.54ds(71) hif3ba-40pa-2.54ds(71) hif3ba-50pa-2.54ds(71) hif3bb-50pa-2.54ds(71) hif3ba-60pa-2.54ds(71) hif3bb-60pa-2.54ds(71) hif3ba-64pa-2.54ds(71) hif3bb-64pa-2.54ds(71) number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b20 hif3b series ribbon cable connector compliant with mil standard four-wall straight through hole b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors contain two types of polarizing slots. use products, confirming (note 1) (note 2). note 5: the 6 contact has no polarity mark. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 562-0503-9-71 610-0111-8-71 610-0181-3-71 610-0112-0-71 610-0113-3-71 610-0114-6-71 610-0115-9-71 610-0116-1-71 610-0117-4-71 610-0118-7-71 610-0119-0-71 610-0141-9-71 610-0120-9-71 610-0142-1-71 610-0121-1-71 610-0143-4-71 hif3-6pa-2.54dsa (71) hif3ba-10pa-2.54dsa (71) hif3bd-10pa-2.54dsa (71) hif3ba-14pa-2.54dsa (71) hif3ba-16pa-2.54dsa (71) hif3ba-20pa-2.54dsa (71) hif3ba-26pa-2.54dsa (71) hif3ba-30pa-2.54dsa (71) hif3ba-34pa-2.54dsa (71) hif3ba-40pa-2.54dsa (71) hif3ba-50pa-2.54dsa (71) hif3bb-50pa-2.54dsa (71) hif3ba-60pa-2.54dsa (71) hif3bb-60pa-2.54dsa (71) hif3ba-64pa-2.54dsa (71) hif3bb-64pa-2.54dsa (71) number of contacts 6 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 26.92 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 12.42 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 0 5.08 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 16.7 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 22.82 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) one at center none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs none one on right side none one on right side one on right and left sides, resp. yes d 23.06 max46.02 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b21 hif3b series ribbon cable connector compliant with mil standard three wall angle type b pcb mounting pattern note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves according to the number of contacts. note 4: the 10 contact connector consists of two types. use products, confirming (note 1) (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0051-8-71 610-0151-2-71 610-0052-0-71 610-0053-3-71 610-0054-6-71 610-0055-9-71 610-0056-1-71 610-0057-4-71 610-0058-7-71 610-0059-0-71 610-0060-9-71 hif3b d -10pa-2.54ds(71) hif3bc-10pa-2.54ds(71) hif3b d -16pa-2.54ds(71) hif3b d -20pa-2.54ds(71) hif3b d -26pa-2.54ds(71) hif3b d -30pa-2.54ds(71) hif3b d -34pa-2.54ds(71) hif3b d -40pa-2.54ds(71) hif3b d -50pa-2.54ds(71) hif3b d -60pa-2.54ds(71) hif3b d -64pa-2.54ds(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b22 hif3b series ribbon cable connector compliant with mil standard three wall straight through hole b pcb mounting pattern note1,note2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note3: the spacer moves to the right according to the number of contacts. note4: the 10 contact connector consists of two types. use products, referring to (note 1) and (note 2). n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0071-5-71 610-0161-6-71 610-0072-8-71 610-0073-0-71 610-0074-3-71 610-0075-6-71 610-0076-9-71 610-0077-1-71 610-0078-4-71 610-0079-7-71 610-0080-6-71 hif3b d -10pa-2.54dsa(71) hif3bc-10pa-2.54dsa(71) hif3b d -16pa-2.54dsa(71) hif3b d -20pa-2.54dsa(71) hif3b d -26pa-2.54dsa(71) hif3b d -30pa-2.54dsa(71) hif3b d -34pa-2.54dsa(71) hif3b d -40pa-2.54dsa(71) hif3b d -50pa-2.54dsa(71) hif3b d -60pa-2.54dsa(71) hif3b d -64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 91.4 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 96.74 max119.7 b23 hif3b series ribbon cable connector compliant with mil standard four wall wrapping type b pcb mounting pattern note 1, note 2. the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3. the spacer moves to the right according to the number of contacts. note 4. the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5. the mark * indicates the number of contacts. note 6. the nut built-in specification product is also provided. the product can be fixed by m2 screws from the rear side. use the screw of (board thickness) +4 mm under the neck. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0503-8 610-0492-3 610-0493-6 610-0494-9 610-0495-1 610-0496-4 610-0497-7 610-0498-0 610-0499-2 610-0504-0 610-0500-0 610-0505-3 610-0501-2 610-0506-6 610-0502-5 hif3ba-10p-2.54w hif3bd-10p-2.54w hif3ba-14p-2.54w hif3ba-16p-2.54w hif3ba-20p-2.54w hif3ba-26p-2.54w hif3ba-30p-2.54w hif3ba-34p-2.54w hif3ba-40p-2.54w hif3ba-50p-2.54w hif3bb-50p-2.54w hif3ba-60p-2.54w hif3bb-60p-2.54w hif3ba-64p-2.54w hif3bb-64p-2.54w number of contacts 10 10 14 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 37.1 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 22.6 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 26.9 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 33.0 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right side one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 33.24 max56.2 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b24 hif3b series ribbon cable connector compliant with mil standard four wall straight through hole [ flux blister prevention type ] b pcb mounting pattern note1: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. n=number of contacts unit:mm the products marked with comply with mil standard. cl no. part number 610-0701-1-71 610-0722-1-71 610-0703-7-71 610-0704-0-71 610-0705-2-71 610-0706-5-71 610-0707-8-71 610-0708-0-71 610-0709-3-71 610-0721-9-71 610-0723-4-71 610-0724-7-71 hif3ca-10pa-2.54dsa(71) hif3cd-10pa-2.54dsa(71) hif3ca-16pa-2.54dsa(71) hif3ca-20pa-2.54dsa(71) hif3ca-26pa-2.54dsa(71) hif3ca-30pa-2.54dsa(71) hif3ca-34pa-2.54dsa(71) hif3ca-40pa-2.54dsa(71) hif3ca-50pa-2.54dsa(71) hif3cb-50pa-2.54dsa(71) hif3cb-60pa-2.54dsa(71) hif3cb-64pa-2.54dsa(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 96.5 f polarizing slot none one at center one on right and left sides, resp. one at center polarizing key install rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 96.74 max119.7 b25 hif3b series ribbon cable connector compliant with mil standard two stage staking right angle through hole note 1, note 2: the number of polarizing slot and key installed positions changes according to products. refer to the list as shown below. note 3: the spacer moves to the right according to the number of contacts. note 4: the 10, 50, 60 and 64 contact connectors consists of two types. use products, confirming (note 1) (note 2). note 5: the mark * ndicates the number of contacts. note 6: the locator is located optionally. unit:mm the products marked with comply with mil standard. cl no. part number 610-1502-0-71 610-1503-3-71 610-1505-9-71 610-1506-1-71 610-1507-4-71 610-1508-7-71 610-1509-0-71 610-1510-9-71 610-1511-1-71 610-1512-4-71 610-1513-7-71 610-1514-0-71 610-1515-2-71 610-1516-5-71 hif3ba-10pa-2.54wb(71) hif3bd-10pa-2.54wb(71) hif3ba-16pa-2.54wb(71) hif3ba-20pa-2.54wb(71) hif3ba-26pa-2.54wb(71) hif3ba-30pa-2.54wb(71) hif3ba-34pa-2.54wb(71) hif3ba-40pa-2.54wb(71) hif3ba-50pa-2.54wb(71) hif3bb-50pa-2.54wb(71) hif3ba-60pa-2.54wb(71) hif3bb-60pa-2.54wb(71) hif3ba-64pa-2.54wb(71) hif3bb-64pa-2.54wb(71) number of contacts 10 10 16 20 26 30 34 40 50 50 60 60 64 64 a 32.0 32.0 39.6 44.7 52.3 57.4 62.5 70.1 82.8 82.8 95.5 95.5 100.6 100.6 b 17.5 17.5 25.1 30.2 37.8 42.9 48.0 55.6 68.3 68.3 81.0 81.0 86.1 86.1 c 10.16 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 60.96 73.66 73.66 78.74 78.74 e 21.8 21.8 29.5 34.5 42.2 47.2 52.3 59.9 72.6 72.6 85.3 85.3 90.4 90.4 27.9 27.9 35.5 40.6 48.3 53.3 58.4 66.0 78.7 78.7 91.4 91.4 96.5 96.5 f polarizing slot (note 1) none one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center polarizing key install (note 2) rohs one on right side none one on right and left sides, resp. yes d 28.14 max51.1 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 78.94 max101.9 91.64 max114.6 91.64 max114.6 96.74 max119.7 96.74 max119.7 b26 hif3b series ribbon cable connector compliant with mil standard b combination pattern b pcb mounting pattern mounting hole spacer note : fix the hif3-mounting hole spacer by screws between upper stage and lower stage connectors. part number cl no. finish rohs hif-3 mounting hole spacer 562-0714-4 pbt black yes note : 2 pieces are contained in a bag. b27 hif3b series ribbon cable connector compliant with mil standard b polarizing key note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to the hif3ba- * d2.54r product. part number cl no. material hif3-gpin(a) 562-0126-6 poly acetal (white) remarks rohs a set of 5 pieces yes hif3-gpin(a) hif3ba-gpin note1: one unit of this product is a set of five pieces in conjunction with a runner. the unit for sale is defined one pack containing 20 pieces. note2: this product is applicable to hif3a- * d2.54r, hif3c- * d2.54c and hif3ba- * d2.54c products. hif3b-gk cl562-0601-8 part number cl no. material hif3ba-gpin 612-0500-2 poly acetal (white) remarks rohs a set of 5 pieces yes b28 hif3b series ribbon cable connector compliant with mil standard b hif3-multi clamp b hif3- * cl pull tab lock g low profile lock pin header b lock f type lock pin header lock f part number : hif3bag- ** pa-2.54dsa(71) low profile type, and used for lock ejection. connector height is reduced. since no connector clamp is needed on the cable side, this is used without turning back on the cable side. take care about this point. part number : hif3bag- ** pa-2.54dsa(71) locking range more reduced than conventional lock type. even if connectors are aligned laterally, the mounting space is reduced. note : the clamp must be replaced for hif3a socket type 60 contacts only. take care about this point. this clamp is used for intermediate connection in the bus-line system, etc. remove compulsory force from the insulation displacement area of the connector in intermediate connection. note: the pin header corresponds to the hif3bae series (lock e). this pull tab is used for the hif3 series equipped with cable clamp function. remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction. note: this hif3- * pull tab can not be used for hif3ba-*pd. note: the pin header corresponds to the hif3bae series (lock e). 27.3 21.5 b29 hif3b series ribbon cable connector compliant with mil standard part number cl no. 610-1041-0 610-1051-3 610-1042-2 610-1043-5 610-1044-8 610-1045-0 610-1046-3 610-1047-6 610-1048-9 610-1061-7 610-1049-1 610-1062-0 610-1064-5 610-1063-2 number of contacts a b 10 14 16 20 26 30 34 40 50 60 64 17.25 22.35 24.8 29.95 37.55 42.63 47.75 55.35 68.04 80.77 85.85 10.16 15.24 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 polarizing guide rohs one at center one right and left side, resp. one at center one right and left side, resp. one at center one right and left side, resp. one at center yes hif3ba-10d-2.54c hif3ba-14d-2.54c hif3ba-16d-2.54c hif3ba-20d-2.54c hif3ba-26d-2.54c hif3ba-30d-2.54c hif3ba-34d-2.54c hif3ba-40d-2.54c hif3ba-50d-2.54c hif3bb-50d-2.54c hif3ba-60d-2.54c hif3bb-60d-2.54c hif3ba-64d-2.54c hif3bb-64d-2.54c unit: mm socket for crimping note: some variations may differ from those in above figures. b30 hif3b series ribbon cable connector compliant with mil standard cover case for crimping socket part number cl no. 562-0201-0-71 562-0202-2-71 562-0203-5-71 562-0204-8-71 562-0205-0-71 562-0206-3-71 562-0207-6-71 number of contacts a b 20 26 30 34 40 50 60 24.5 30.2 32.2 34.2 36.2 39.2 42.2 18.0 20.0 22.0 24.0 26.0 29.0 32.0 c 12.0 14.0 16.0 18.0 20.0 23.0 26.0 d 30.5 32.0 33.0 33.5 35.5 38.0 40.5 e rohs 29.95 37.55 42.63 47.75 55.35 68.04 80.77 yes hif3-20cv(71) hif3-26cv(71) hif3-30cv(71) hif3-34cv(71) hif3-40cv(71) hif3-50cv(71) hif3-60cv(71) unit: mm note 1: the type f lock pin header cannot be used for a mating member. note 2: note that the product cannot be used with awg #20. applicable jacket diameters are as described below. 20 contacts: 1.7 mm diameter max 26 to 40 contacts: 1.6 mm diameter max 50 to 60 contacts: 1.4 mm diameter max b31 hif3b series ribbon cable connector compliant with mil standard hif3-2226sc hif3-2226sca applicable cable manual crimping tool 562-0079-8 562-0244-2 gold plated contact in bag selective gold plated contact in bag rohs yes awg#22 to #26 ul 1007 stranded wire hif3-t2226hc hif3-2428sc hif3-2428sca applicable cable manual crimping tool 562-0124-0 562-0246-8 gold plated contact in bag selective gold plated contact in bag awg#24 to #28 ul 1007 stranded wire hif3-ta2428hc hif3-2022sc applicable cable manual crimping tool 562-0492-4 gold plated contact in bag awg#20 to #22 ul 1007 stranded wire hif3-ta2022hc contact for crimping socket hif3-2226scf hif3-2226scfa applicable cable ** 562-0080-7 562-0245-5 gold plated contact in reel selective gold plated contact in reel awg#22 to #26 ul 1007 stranded wire note:* products have both side careers. hif3-2226scc hif3-2630scc part number 613-0004-7 613-0003-4 cl no. awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire applicable cable hif3-tb2226hc hif3-tb2630hc manual crimp tool f 2.6 2.1 rohs yes e 2.3 2.0 d 1.8 1.35 c 1.8 1.4 b 0.8 0.8 a 11.5 11.5 part number hif3-2226scfc hif3-2630scfc hif3a-3236scfc cl no. 613-0002-1 613-0001-9 613-0005-0 applicable cable awg#22 to #26 ul 1007 stranded wire awg#26 to #30 ul 1007 stranded wire awg#32 to #36 ul 1007 stranded wire f 2.6 2.1 1.5 rohs yes e 2.3 2.0 1.4 d 1.8 1.35 1.1 c 1.8 1.4 1.1 b 0.8 0.8 1.7 a 11.5 11.5 12.4 hif3-2428scf hif3-2428scfa applicable cable 562-0125-3 562-0247-0 gold plated contact in reel selective gold plated contact in reel awg#24 to #28 ul 1007 stranded wire hif3-2022scf applicable cable 562-0493-7 gold plated contact in reel awg#20 to #22 ul 1007 stranded wire type va (selective gold plated in reel) type va (selective gold plated contact in bag) rohs yes rohs yes rohs yes rohs yes rohs yes b32 hif3b series ribbon cable connector compliant with mil standard b tools crimping tool manual crimping tool hif3-t2226hc automatic crimping tool (type: cm-105) contact extraction tools how to use the extraction tool (1) how to extract contacts as shown in figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed. (2) how to adjust the lance (raise) in order to re-insert the contact removed from the insulated case, raise the contact lance area using the tool a, and re-insert the contact, as shown in figure 2. figure 1 part number hif1-po cl no. 550-0049-7 part number hif3-t2226hc cl no. 550-0063-8 part number cm-105 cl no. 901-0005-4 b33 hif3b series ribbon cable connector compliant with mil standard type manual automatic item manual crimping tool automatic crimping tool unit applicator part number hif3-t2226hc hif3-ta2428hc hif3-ta2022hc hif3-tb2226hc hif3-tb2630hc cm-105 ap105-hif3-22-28scf ap105-hif3-22-28scfa ap105-hif3-2022s ap105-hif3-2226scfc ap105-hif3-2630scfc ap105-hif3-3236scfc hif1-po cl no. 550-0063-8 550-0100-2 550-0124-0 550-0154-1 550-0155-4 901-0005-4 901-4031-6 901-4030-3 901-4027-9 901-4005-6 901-4006-9 901-4007-1 550-0049-7 applicable contact hif3-2226sc hif3-2226sca hif3-2428sc hif3-2428sca hif3-2022sc hif3-2226scc hif3-2630scc hif3-2226scf hif3-2428scf hif3-2226scfa hif3-2428scfa hif3-2022scf hif3-2226scfc hif3-2630scfc hif3-3236scfc applicable cable awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#22 to #26 awg#24 to #28 awg#22 to #26 awg#24 to #28 awg#20 to #22 awg#22 to #26 awg#26 to #30 awg#32 to #36 extraction tool ( note1 ) ( note1 ) note1: ap106-hif3-22-28scf and ap105-hif3-22-28cfa can be modified by changing a few parts. b34 hif3b series ribbon cable connector compliant with mil standard b socket side (crimping) assembling procedures (1) as shown in figure 1, peel the applicable cable (awg#20 to #26) jacket, and connect it using crimping jig hif3-ta2022hc, hif3-ta2226hc, or hif3-ta2426hc. in this case, insert the cable so as to hit the contact cable stripper position as shown figure 2. (2) after connection as shown figure 2, check the contact direction, and insert the contact as shown figures 3 and 4. slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (a). note1 : for handling procedures for special crimping tools, refer to the "handling instruction manual". note2 : wire strip length: refer to crimp condition sheet. figure 1 figure 2 figure 3 figure 4 wire strip length b35 hif3b series ribbon cable connector compliant with mil standard hif3b connection circuit diagram type ab type ad type cd type ab type ad type cd b36 hif3b series ribbon cable connector compliant with mil standard type ac type cc type aa type ac type cc type aa b37 hif3b series ribbon cable connector compliant with mil standard hif2e r(s) a to hif3b connection circuit diagram type aa type ac b38 hif3b series ribbon cable connector compliant with mil standard type ba type bc b39 hif3b series ribbon cable connector compliant with mil standard hif2e r(s)b to hif3 connection circuit diagram type aa type ac b40 hif3b series ribbon cable connector compliant with mil standard type ba type bc b41 hif3b series ribbon cable connector compliant with mil standard features 1. in-line type this connector can be used for internal wiring cable to cable within equipment. 2. compatibility this connector is compatible with hif3a series as well as hif3b series socket. 3. applicable cable the applicable cable is ul2651 awg#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8 to 1.0mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. rating current rating : 1a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 200v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) ordering information hif3ba - * * p d - 2.54 r - mc qe r w u t y item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 3. contact resistance 15m ohms max. 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 15m ohms max. 500 cycles material part material finish remarks insulator pbt black ul94v-0 plug contact beryllium copper gold plated over nickel underplated hif3b in-line type ribbon cable connector q series name : hif3bb (50, 60, 64 contacts only) hif3bd (10 contacts only) hif3bae (60 contacts only) w number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60 and 64 e p : plug r d : contact alignment : d : double t contact pitch : 2.54mm y connection type : ribbon cable u mc : mold clamp rohs polarizing slot h g f e d a c b number of contacts cl no. part number hif3bd e -10pd-2.54r-mc hif3ba e -16pd-2.54r-mc hif3ba e -20pd-2.54r-mc hif3ba e -26pd-2.54r-mc hif3ba e -30pd-2.54r-mc hif3ba e -34pd-2.54r-mc hif3ba e -40pd-2.54r-mc hif3ba e -50pd-2.54r-mc hif3bb e -50pd-2.54r-mc hif3ba e -60pd-2.54r-mc hif3bb e -60pd-2.54r-mc hif3bae-60pd-2.54r-mc hif3ba e -64pd-2.54r-mc hif3bb e -64pd-2.54r-mc 611-0031-7 611-0032-0 611-0033-2 611-0034-5 611-0035-8 611-0036-0 611-0037-3 611-0038-6 611-0041-0 611-0039-9 611-0042-3 611-0059-6 611-0040-8 611-0045-1 10 16 20 26 30 34 40 50 50 60 60 60 64 64 31.98 39.60 44.68 52.30 57.38 62.46 70.08 82.78 95.48 100.56 17.48 25.10 30.18 37.80 42.88 47.96 55.58 68.28 80.98 86.06 10.16 17.78 22.86 30.48 35.56 40.64 48.26 60.96 73.66 78.74 28.14 max51.1 35.74 max58.7 40.84 max63.8 48.44 max71.4 53.54 max76.5 58.64 max81.6 66.24 max89.2 78.94 max101.9 91.64 max114.6 91.7 max121.3 96.74 max119.7 21.88 29.50 34.58 42.20 47.28 52.36 59.98 72.68 85.38 90.46 30.13 37.75 42.83 50.45 55.53 60.61 68.23 80.93 93.63 98.71 33.2 35.2 37.2 35.2 yes one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center one on right and left sides, resp. one at center 29.2 31.2 29.2 b42 hif3b series ribbon cable connector compliant with mil standard plug note 1, note 2: the number of polarizing slot and key installed positions changes according to products. the 10 contact connector only has no position for polarizing key insulation. note 3: the number indicated in parentheses are sizes for 60 and 64 contact connectors. note 4: the hif3bae-60pd-2.54r-mc product partially differs in a locking form, and the mating member is applicable for hif3a only. unit:mm * d size locking size unlocking size b43 hif3b series ribbon cable connector compliant with mil standard b connection procedures type ao type bo type co type do note1: cable length tolerance less than 500 (mm) more than 500 (mm) note2: when a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, please contact hirose sales. +10 +0 0 +3 + 0

▲Up To Search▲

Price & Availability of HIF3BA-14PA-254DS

	To Download HIF3BA-14PA-254DS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .